Not FoundNow that you have the leg mortised, you can determine the size of the tenon. It may be helpful to draw the position and size of the tenon on the end of the skirt.
Not FoundDado blades will make stock removal easier. However, a normal table saw blade could be used. Carefully set the height of the blade so you will remove the correct amount.
Not FoundA sliding T-square that fits into the dado on the top of your table saw is helpful in holding the skirts securely.
Not FoundMake the second cut.
Not FoundYou may need to change the height of the blade to make the tenon the correct size.
Not FoundThis is how the tenon should look when it is done.